::Spa Supplies:
Spa Chemicals:
EZ Spa
 | |
Why settle for traditional non-chlorine
shock when just ounces of E-Z Spa OM™
only “once-a-week” also clarifies and softens
water, relieves balance anxiety, eliminates chemical odors
and foaming, and inhibits hardness scaling … all
with the economy of monopersulfate!
Benefits: Use only ounces
“once-a-week” to provide clarity, balance stability
and soothing water for bathing. Replaces need for monopersulphate
(non-chlorine shock), foam out, clarifier, scale preventative,
and pH lock (pH perfect), and chemical filter cleaners.
Advantages: Economical, balanced,
dependable … “once-a-week” simple. Keeps
water beautifully clear. Eliminates chemical odor and foaming.
Inhibits hardness scaling on equipment and spa surface.
Spoil yourself with
E-Z Spa™ SIMPLICITY:
See E-Z Start Kit™ for
our full line of spa products.
Start-Up (Fresh
water fill)
1) Sequester metals if applicable. It is best if no metals
are present in spa water. We recommend EZ Pre-Start™
to remove metals and phosphates.
2) Balance spa water to: 7.2 – 7.6 pH, 250 – 400
ppm. Calcium Hardness, 80 – 120 ppm. Total Alkalinity.
3) Initiate start-up for any spa size with 2 to 3 oz. dichlor
shock (EZ Boost™) introduced with spa
pump running.
4) Next, dose with 1 oz. (2 tbsp.) of E-Z SpaOM™
per 100 gallons of water by simply dissolving product in circulating
water near any spa jet.
Note: Wait minimum of 1 hour before
entering tub.
5) After 48 hours, pressure rinse the filter cartridge. Chemical
soaking is not required.
6) Test for 1.0 or higher “Total Chlorine” level
with any 5-way chlorine test strip.
It is not unusual for pH to drop slightly after dosing. Buffers
will adjust pH back up typically in 24 – 48 hours. Test
for pH before dosing as opposed to after.
Routine Maintenance
In conjunction with OZONE or MINERAL PURIFIER, use 1 oz. (2
tbsp.) of E-Z SpaOM™ per 200 gallons
once-a-week for typical spa usage; and use minimum of 1 oz.
of Dichlor (EZ Boost™) per 350 gallons
weekly, slightly more E-Z SpaOM™ for
heavier use. Wait at least 1 hr. for chemicals to circulate
before entering tub. E-Z SpaOM™ and
sanitizer may be added simultaneously.
E-Z SpaOM™ also makes
spa water care simple and dependable without ozone or mineral
purifiers. Just increase the E-Z Spa
dosage to 1 oz. per 100 gallons of spa water and proceed with
the same routine maintenance instructions above.
Test weekly and after heavy use for
1.0 or better “Total Chlorine” and balance with
a 5-way chlorine test strip. Adjust weekly dosage or spot
dose as needed. Have water tested monthly for balance by an
Authorized Dealer. Pressure rinse filter cartridge every 2
weeks or as needed to maintain clear water.
|
|
|
